BIM Information

Clash bodies:

• Simplified graphical representation of consumed space only
• Consumed space is accurate to Clopay specifications
• Not model specific
• Low file size
• Type properties changes require minimal computing resources
• Uses: interference detection

Sections Only:

• Solid door sections only
• Full specifications included
• Low file size
• Type properties changes require minimal computing resources
• Uses: simple building modeling, specifying, exterior rendering

Sections Only with Windows:

• Door sections with optional windows
• Full specifications included
• Medium file size
• Type properties changes require moderate computing resources
• Uses: simple building modeling, specifying, exterior rendering

Bi Parting:

• Two operable wall panels, each with a fixed end, meeting and latching within the opening

Single Slide Door:

• One operable wall panel with one fixed end and one latching end

Face of Wall Mount Door:

• Door mounting condition where guides surface mount to the interior or exterior side of the wall, and additional side clearance is allowed for tension wheel and drive mechanism
• Full clearance of opening is maintained

Between Jamb Mount:

• Type of mounting where the guides are positioned between the mounting surfaces and not on the surface (interior or exterior) of the wall
• Guides are generally "packed out" mounted to the inside of jamb and hood below lintel
• Clear opening size will be reduced and may require "fascia" to close off back of hood

Complete Door:

• Door with track and counterbalance systems and optional windows
• Full specifications included
• Largest file size
• Type properties changes require the most computing resources
• Uses: precise building modeling, specifying, exterior rendering, interior rendering, interference detection, accurately dimensioned interior and side elevation views